Troubleshooting - C-SCOPE EVO6000 User Manual

Troubleshooting

If you have problems with your EVO6000 the fixes below may get you back up and running quickly. If
you still need any help or advice please get in touch with us by email,
are in the Contact section
EVO6000 will
not turn on
EVO6000 keeps
making noises
No sound
coming from
wireless
headphones
No sound
coming from
wired
headphones
Bluetooth
wireless will not
connect
·
Check your EVO6000 is charged up. Connect it to the
supplied charger or a USB
for a full charge.
·
Move away from possible sources of interference like high
voltage lines, other detectors or electronics.
·
Turn down the sensitivity
·
Turn on ground tracking
your EVO6000
·
Make sure the master volume
to zero.
·
Check that your wireless headphones
are charged up.
·
Adjust the volume on your wireless headphones.
·
Check that you have Bluetooth
EVO6000
·
Ensure your wireless headphones are paired to your
EVO6000. If you are not sure if they are paried, repeat the
paining process.
·
Make sure the master volume
to zero.
·
Check that your headphones
that the headphone indicator is showing on the screen.
·
If your headphones have a volume button or switch, adjust
the volume on your headphones.
·
Sometimes pairing or reconnecting over Bluetooth
time. Allow a minute or so for your EVO6000 to connect.
·
Check that you have Bluetooth
EVO6000
·
Ensure your wireless headphones
EVO6000. If you are not sure if they are paried, repeat the
pairing process.
26 / 32
online or by phone, our details
battery pack for two hours
on your EVO6000
or adjust the ground balance
on your EVO6000 is not set
are turned on and
®
turned on on your
on your EVO6000 is not set
are plugged in securely and
®
®
turned on on your
are paired to your
on
takes