Settings In The Leica Mdrs For Use With Leica Fl800; Focussing And Calibration Of The Nir-Data Overlay - Leica FL800 User's Manual & Installation Instructions

Assembly

Settings in the Leica MDRS for use with Leica FL800

For the activation of the LEICA FL800 at the LEICA MDRS
(SW 4.7 and higher) press Ctrl + Alt + F3.
This will reboot the LEICA MDRS.
After that you will be asked to enter two Activation Keys:
Picture 1: Main Activation Key
Picture 2: Leica FL800 Activation Key
The two activation codes you will get from:
MedXchange
Office number: 9 am to 5 pm EST USA
+1 941 794 9977
Cell numbers:
Chris Samano +1 941 538 2732
Corey Park +1 941 524 4041
Mike Wise +1 941 704 4030
Email: leica@medxchange.com
16 Leica FL800 for Leica M720 OH5, Leica M525 OH4 and Leica M525 F50 / Ref. 10 716 079 / Version 01
In combination with the Leica MDRS with fluorescence
software, the Leica DI C700 can be used for the correctly
scaled display of the FL800 video signal for the anatomy
visible in the microscope.

Focussing and calibration of the NIR-data overlay

é The file „medxrecorderv4.ini" in
„my Computer\C:\MedXStream" has got 4 parameters to define
the size and position of the injected NIT-image.
é Change the parameters to match the injected image with
the object.
é The ICG-settings are the last in the parameters' list, but a sepa-
rate group of parameters in the file „medxrecorderv4.ini".
Top
Left
Width
...
Facility=0
[ICG]
Top=205
Left=155
Width=500
Height=376
[Ports]
...
é Use the new ICG-standard sample with the two ICG-objects for
the correct setup.
é The long distance between both objects allows a very precise
setting of all parameters.
é Focus on the standard sample in white-light mode and magnify
until the standard sample matches the image size on the video
monitor.
é Change to the ICG-mode. Observe the fluorescence signal and
adjust the separate NIR-fine focus of the Dual Video Adapter at
the chosen magnification. Fix the alignment with the enclosed
adjustment screws.
Height