Table of Contents X-Smart V 1.4 Table of Contents About this manual......................5 How to work with the manual ....................5 Record of changes......................5 Safety ..........................6 Intended use ........................6 Liability ..........................6 2.2.1 General liability .....................6 2.2.2 Machine-specific liability ..................6 User qualification for installation ..................7 Certifications ........................7 Safety symbols on the machine..................8 Safety symbols in the manual ...................8...
Page 4
Table of Contents X-Smart V 1.4 Troubleshooting......................18 General troubleshooting procedure ................18 Contact service .......................18 Troubleshooting guide ....................18 Technical data ......................19 General specifications ....................19 Dimensions and mass ....................19 Ambient conditions ......................20 Noise level ........................20 Safety classifications ......................20 Electrical specifications....................20 6.6.1 Power supply ......................20 6.6.2...
About this manual X-Smart V 1.4 About this manual The manual shows the information necessary to: install the machine operate the machine perform basic maintenance correct small problems. The X-Smart and all its versions are referred to in the manual as the ’machine’. This manual contains the original instructions.
Safety X-Smart V 1.4 Safety WARNING Read the manual before you install or use the machine. Failure to do so can result in personal injury, death or property damage. Intended use The machine is designed to dispense colorants into a can. Any other use of the machine is strictly forbidden. Liability 2.2.1 General liability...
Safety X-Smart V 1.4 Personal harm should be avoided by strictly following the materials safety data sheets (MSDS) for colorants, (base) paint and brush liquid. Do not use flammable liquids in the brush container. The use of flammable colorants or colorants that diffuse potential explosive vapors may present fire and explosion risks.
Safety X-Smart V 1.4 Safety symbols on the machine Moving parts hazard Pinch hazard Warning Read the manual Safety instructions Safety symbols in the manual WARNING Note Can cause personal injury. Shows further information. CAUTION Can cause damage to the machine. Disposal of the machine 1.
Operator manual X-Smart V 1.4 Operator manual Description 3.1.1 Overview of the machine Top cover Can table Canister Emergency stop switch Pump Brush unit Slot (for the can table) Turntable Nozzle Agitator (part of the stirring mechanism) Can sensor...
Operator manual X-Smart V 1.4 3.1.3 Type plate: serial number www.fast-fluid.com THE TINTING COMPANY www.fluidman.com A Unit of INEX Corporation Model XXXXXX Prod.Week : XX-XXXX Serial No: XXXXXXXXX- XXXXXX INDEX India Pvt.Ltd Survey no:256,GIDC Manjusar,Savli Dist.Vadodara 391 770,INDIA 3.1.4 Type plate: details www.fast-fluid.com www.fluidman.com xx/xx V, xx W, xx/xx Hz,X-Wire...
Operator manual X-Smart V 1.4 3.2.2 Placing a can 1. Check the height of the can. Note The correct height of the can table depends on the height of the can. 2. Place the can table (A) in the correct slots for the correct height.
Operator manual X-Smart V 1.4 Maintenance 3.3.1 X-Smart Maintenance Kit To keep your X-Smart in optimal condition, we highly recommend you to use the X-Smart Maintenance Kit. The X-Smart Maintenance Kit contains everything you need to keep your machine in optimal condition for the period of 1 year.
Operator manual X-Smart V 1.4 2. When the brush is too dirty and does not clean the nozzle of the canister, rinse and clean the brush. See § 3.3.3. 3. When the nozzles are too dirty, clean the nozzles individually with a damp cloth.
Operator manual X-Smart V 1.4 7. Fill the brush container with fluid. This fluid must be a water- based cleaning agent. WARNING Do not put flammable liquids in the brush container. Note Do not exceed the maximum filling height (F). Note The optimum fluid level depends on the type of colorant that is used.
Operator manual X-Smart V 1.4 3.3.5 Refilling a canister WARNING Check the material safety data sheet (MSDS) of the colorants for the personal protection measures that are required for handling the colorant. CAUTION Make sure that the colorant level in the canister is correct. If a canister is empty, it can cause an inaccurate dispensing and/or a recipe fault.
Installation X-Smart V 1.4 Installation Note For the unpacking and installation procedures, refer to the separate installation instruction sheets. Turning on the machine 1. Connect the power cable to the wall socket. When the machine is operational, you hear two ’beeps’. 2.
Troubleshooting X-Smart V 1.4 Troubleshooting Note For all error messages on the computer: see the help topic in the dispense software. General troubleshooting procedure 1. Try to solve the problem with the information in this manual. See § 5.3. 2. If it is not possible to solve the problem with the information in this manual, contact service.
Technical data X-Smart V 1.4 Technical data General specifications Parameter Specification Metric standard Imperial standard Model X-Smart Number of canisters Dispensing Sequential Pump type Piston pump Cleaning system Rotary brush Suitable for Water and universal colorants Canister size [L - USgal] 2.25 0.594 Resolution [mL/step - fl oz/step]...
Technical data X-Smart V 1.4 Ambient conditions Parameter Specification Metric standard Imperial standard Temperature [°C - °F] +10 to +40 +50 to +104 Altitude above sea level, operational [m - ft] -10 to 2000 -33 to 6562 Altitude above sea level, out of operation [m - ft] -10 to 12000 -33 to 39370 Maximum Relative Humidity, without condensation...