About This Manual; How To Work With The Manual; Record Of Changes - Idex Fast & Fluid Management X-SMART Original Manual

About this manual

1 About this manual
The manual shows the information necessary to:
- install the machine
- operate the machine
- perform basic maintenance
- correct small problems.
The X-Smart and all its versions are referred to in the manual as the 'machine'.
This manual contains the original instructions. The original language of the manual is English.
1.1

How to work with the manual

For the safe use of the machine, it is important:
1 To familiarize yourself with the structure and content.
2 To read the safety chapter in detail and make sure you understand all the instructions. See chapter § 2.
3 To carry out the actions completely and in the given sequence.
1.2

Record of changes

/i
Edition
1.0
1.1
1.2
1.3
1.4
Note
For the unpacking and installation procedures, refer to the separate installation
instruction sheets.
Editor Check Date
ET TB 02/2013
ET TB 06/2013
ET TB 06/2014
MBL TB 12/2017
PHS SG 03/2021
X-Smart
Description
First edition
X-Smart Maintenance Kit added
Certification and other changes
Liability and technical data changes
Maintenance kit purchase note is added on pg. 15 & 16
5
V 1.4