Cleaning The Nozzles: Daily - Idex Fast & Fluid Management X-SMART Original Manual

Operator manual
7. Fill the brush container with fluid. This fluid must be a water-
based cleaning agent.
8. Slide the brush unit (A) back in the bracket (B).
3.3.4

Cleaning the nozzles: daily

1. Examine the nozzle (A) for contamination.
2. If necessary, clean the nozzle. Use the X-Smart cleaning
cloth, as provided in the X-Smart Maintenance Kit, with a non-
organic cleaning liquid.
* X-SMART Maintenance Kit to be purchased separately.
WARNING
Do not put flammable liquids in the brush
container.
Note
Do not exceed the maximum filling height (F).
Note
The optimum fluid level depends on the type
of colorant that is used.
Note
The brush unit is properly connected to the
bracket when you feel a snap-fit. Make sure
you hear the click sound.
WARNING
Do not clean the nozzles when the turntable
moves.
X-Smart
15
F
A
B
A
V 1.4