Idex Fluid Management AT1500HS Technical Support

Fluid Management
AT1500HS Canister Remapping
PRODUCT(S)
AT1500HS
PURPOSE
This instruction is for all customers using Fluid Management's ColorPro 4.x. software.
Follow this procedure if the pump or agitation motor has failed and there is a spare
position available.
INSTRUCTIONS
1. Close the ColorPro program
2. Click on SERVICE.EXE bridge on your desktop
3. Enter password service
4. Click on Setup (F4)
5. Click on the Canister tab
6. Click on the spare to activate and click Enter on your keyboard
7. Wait for the pulse test to complete
8. The spare canister should be activated when the number box goes from black to
grey
9. Click on Options (F5)
10. Click on the color that is not dispensing
11. Rename it "Spare" under ingredient name
a. For example, if the "C" colorant is not dispensing, click on the "C" colorant
and rename it to "Spare"
12. Click Apply, then click OK to save the changes
13. Click on Options (F5)
14. Click on the spare canister position just activated
CTB-12
Reformatted document, re-released.
Technical Support
AT1500 Canister Remapping 6/27/19 Original Release