Finding The Print Server In The Network; Software Installation 'Seh Product Manager - SEH ONE Quick Installation Manual

 Finding the Print Server in the Network
Once the print server is connected to the network, it checks whether an IP
address can be obtained from the boot protocols BOOTP or DHCP. If this is not
the case, the print server assigns itself an IP address via Zeroconf from the
address range (169.254.0.0/16) which is reserved for Zeroconf.
By means of the SEH Product Manager tool you can find the print server's IP
address and, if necessary, assign a suitable IP address to the print server, as
described below.
• 'Software Installation 'SEH Product Manager''
• 'Finding the Print Server (Determining the IP Address)'
• 'Changing the IP address'
Important:
The client, printer and print server must be assigned to
the same local network segment.

Software Installation 'SEH Product Manager'

The 'SEH Product Manager' is a software tool developed by SEH
Computertechnik GmbH for the administration and management of SEH
Computertechnik GmbH devices on the network.
The software is installed on all clients from which SEH Computertechnik GmbH
devices are to be administrated and managed on the network.
First, you have to download the installation file for the SEH Product Manager
from the website of SEH Computertechnik GmbH:
http://www.seh-technology.com/services/downloads/
download-printserver-extern/printserver-one.html
Quick Installation Guide
9

[en]
7

8

7