Printing In Macos - SEH ONE Quick Installation Manual

14. Click Next.
15. (In the area Device Type, tick Standard.)
16. (Select Generic Network Card from the list.)
17. (Click Next.)
18. From the lists Manufacturer and Printers, select the printer model.
19. Click Next.
20. Enter a description into the Printer name box.
21. Click Next.
The printer is being installed.
22. Tick Do not share this printer.
23. Click Next.
24. Click Print a test page.
The test page is printed.
25. Click Finish.
 The printer is set up on the client. If you print via the printer you have set up,
the print job will be printed on the printer connected to the print server.

Printing in macOS

The printer is set up on the client using the system preferences.
Requirements:
– The hardware installation has been done, see
– The print server and the printer are turned on.
– The print server is known to the network via its IP address, see
1. Open the System Preferences.
2. Click Printers and Scanners.
3. Click the icon
The Add dialog appears.
4. Click IP.
5. Into the IP Address box, enter the IP address of the print server (with leading
zeros).
6. From the Protocol list, select Select Internet Printing Protocol - IPP.
7. Enter freely definable names for Name and Location.
8. From the Use list, select the printer driver.
9. Click Add.
The setting up dialog appears.
10. Configure the printer options.
11. Click OK to confirm.
 The printer is set up on the client. If you print via the printer you have set up,
the print job will be printed on the printer connected to the print server.
Quick Installation Guide
.
6

[en]
7

11