Appliance Control - Hyundai H-ARI17-09H/I Instruction Manual & Warranty Card

Electric air conditioner (split system)
6. DEVICE CONTROL
Fig. 2. Description of indoor unit control panel
The conditioner may be controlled from a remote control board or from an indoor unit control
panel.
If the remote control board is lost or cannot be used at the moment, you may use a control
button «on/off» located behind the front panel.
For that, open the front panel carefully by pulling it from the left and right.
1. Press once to activate the automatic mode.
2. Press again within five seconds to activate the forced cooling mode.
The front panel of air conditioner there is a display that shows the current temperature and
defined, and indicators* display modes and settings: power, night mode, temperature, timer,
compressor operation (see Fig. 3**).
The front panel of the conditioner comprises a display showing specified and current tem-
perature, as well as indicators* reflecting modes and parameters of work: power supply, sleep
mode, temperature, timer, compressor operation (see Fig. 3**).
* Presence of this function depends on the delivery lot.
Timer
7.
Sleep indicator
EN