Chapter 4: Connect And Pair; Connect To Pc; Pair To Mobile Device - Dell Pro Wireless Headset User Manual

Hide thumbs Also See for Pro Wireless Headset:
Table of Contents

Advertisement

Connect to PC

Your Bluetooth USB adapter comes pre-paired to your headset.
Steps
1. Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
2. The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. If you are
wearing your headset you hear "PC connected" to indicate the connection has been established. When on a call, the LED on
the USB adapter flashes blue. When not on a call the LED is solid.
3. OPTIONAL Load Plantronics Hub for Windows/Mac by visiting
allows you to customize your headset behavior through advanced settings and options.

Pair to mobile device

Steps
1. To put your headset in pair mode, slide and hold the Power
the headset LEDs flash red and blue.
Connect and pair
poly.com/software
or visit www.dell.com/support. This
switch away from the off position until you hear "pairing" and
4
Connect and pair
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wl5022B4220tBt600

Table of Contents