Bosch LECTUS duo 3000 Installation Manual page 31

LECTUS duo 3000 readers
3.2.1 Selecting the interface type (Switch 1)
Switch 1
Off
On
3.2.2 Selecting the credential technology (Switch 2)
Switch 2
Off
On
Bosch Security Systems B.V.
Mode
Wiegand
RS-485/OSDP
Mode
Classic + EV1/EV2
EV1/EV2
Behavior
The reader uses Wiegand
interface.
It only uses the signals marked
with "Wiegand" interface in Table
1.
The reader uses the RS-485
interface with the OSDP protocol.
It only uses the signals marked
with interface "RS-485" in Table
1.
Behavior
The reader reads both
Mifare Classic and
Mifare DESFire EV1/
EV2 credentials.
The reader only reads
Mifare DESFire EV1/
EV2 credentials.
31
Connection | en
2020-10 | V02 |