Disposal, Recycling Of Used Devices; Decommissioning; Disposal Of New Equipment Packaging; Disposal Of Electrical Equipment - unicraft PG-I SE Series Operating Instructions Manual

Disposal, recycling of used devices

14 Disposal, recycling of used
devices
Please take care in your own interest and in the interest
of the environment that all component parts of the ma-
chine are only disposed of in the intended and permitted
way.

14.1Decommissioning

Immediately decommission used machines in order to
avoid later misuse and endangering of the environment
or of persons.
Step 1: Eliminate all environmentally hazardous operat-
ing materials from the used device.
Step 2: If required, disassemble the machine into easy-
to-handle and usable components and parts.
Step 3: Dispose of machine components and operating
materials by the disposal channels provided.
14.2Disposal of new equipment packa-
ging
All packaging materials and packaging aids used are
recyclable and must always be recycled.
These components must be disposed of separately and
properly. If in doubt, contact municipal waste disposal.
If necessary, a specialist waste disposal company
should be called upon to help with the processing of the
waste.

14.3Disposal of electrical equipment

Electrical equipment contains a variety of recyclable ma-
terials and environmentally harmful components.
These components must be disposed of separately and
properly. In case of doubt, contact the municipal waste
disposal department.
If necessary, a specialist waste disposal company
should be called upon to help with processing.

14.4Disposal of lubricants

Remove any leaking, used or excessive grease at the lu-
bricating points.
Disposal notes for used lubricants are available from the
manufacturer of the lubricants. If necessary, request the
product-specific data sheets.
28

15 Spare parts

DANGER!
Risk of injury due to the use
of wrong spare parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
The manufacturer's warranty will become null and
void if non-permissible spare parts are being used.

15.1Ordering spare parts

The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indica-
tions may not be taken into consideration. If the indica-
tions regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of construction on the type plate which is
fixed on the device.
Example
The tank cap for the PG-I 42 SE generator must be or-
dered. The tank cap has the number 5 in the spare part
drawing 2.
When ordering spare parts, send a copy of the spare
parts drawing (2) with the marked component (tank cap)
and marked position number (5) to the authorised dealer
or to the spare parts department and provide the follo-
wing information:
- Type of device: Generator PG-I 42 SE
- Item number: 6706420
- Drawing number: 2
- Position number: 5
The item numbers of your device:
Generator PG-I 42 SE: 6706420
Generator PG-I 80 SE: 6706800
PG-I SE Series | Version 1.04