Introduction; Device Description; Contents Supplied - Scheppach SC2200PE Translation Of Original Instruction Manual

1. Introduction

Manufaturer:
scheppach
Fabrikation vonHolzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled work-
ers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the
non-compliance with the electrical specifications
and the VDE 0100, DIN 57113 / VDE 0113 regu-
lations
We recommend:
Read through the complete text in the operating
instructions before installing and commissioning the
device.
The operating instructions are intended to help
the user to become familiar with the machine and
take advantage of its application possibilities in
accordance with the recommendations.
The operating instructions
information on how to operate the machine safely,
professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how
to increase reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable
regulations that apply for the operation of the
machine in your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
contain important
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for
the operation of machines of the same type must be
observed.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2. Device description (Fig. 1)
1 Clutch handle for wheel drive
2 Handle
3 Steering bar
4 Swivel bar
5 Engine
5a Oil dipstick
6 Gear selector lever
6a Oil drain screw
7 Wheel
8 Support wheel
9 Brush
10 Guard left/right
11 Mounting bars for snow blade / collecting con-
tainer
12 V-belt cover
13 Brush height adjustment lever
14 Steering bar adjustment
15 Throttle
16 Clutch handle for brush drive
17 Brush speed control
18 Tank cover
3. Contents supplied (Fig. 2 - 6)
• After unpacking, check all parts for any transport
dam age. Inform the supplier immediately of any
faults.
• Later complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize yourself
with the machine by carefully reading these in-
structions.
• Use only original accessories, wearing or re place-
ment parts. You can find replacement parts at your
dealer.
• When ordering, include our item number and the
type and year of construction of the machine.
m Attention
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
GB | 21