Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CAMBRIONIX TS3-16
Summary of Contents for CAMBRIONIX TS3-16
- Page 1 User Manual TS3-16...
-
Page 2: Table Of Contents
1.Table of Contents 1.Table of Contents 2.Your TS3-16 at a glance 2.1.Key Features 3.Safety 3.1.Signal word panel 3.2.Safety alert symbol 3.3.Pictograms 3.4.Product modification 3.5.Power supply 3.6.Storage and Installation 4.Getting Started 4.1.What's Included 4.2.Connecting to the mains 4.3.Connecting to Host 4.4.Registration 4.5.Help and Support... -
Page 3: Your Ts3-16 At A Glance
(up to 2.4A). The firmware can be up-dated to allow new charging profiles to be added, ensuring the TS3-16 can charge the latest devices. It is ready to charge out-of-the-box and to sync devices when attached to a host computer. -
Page 4: Safety
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or minor (reversible) injury. Indicates a potentially hazardous situation which, if not avoided, may result in damage to the product and/ or its functions or of a property in its proximity. TS3-16 Page 3 of 21... -
Page 5: Safety Alert Symbol
Mandatory regulation 3.4.Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations. Modifications to the product could affect safety and render the product non-compliant to relevant safety standards, which could result in injury or damage to the product. -
Page 6: Power Supply
Do not short circuit the Power Supply Unit (PSU) supplied with your product Do not disconnect the power cord while the product is being used Do not bend or pull the power cord with excessive force TS3-16 Page 5 of 21... -
Page 7: Storage And Installation
Do not place the power cord near heat sources Connect the plug to an earthed socket Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range... -
Page 8: Getting Started
The hub is now ready to charge attached devices. 4.3.Connecting to Host Once the power is connected connect the TS3-16 to your host system using a Thunderbolt™ 3 cable, this is provided with your hub. Using an incorrect host cable may result in the hub and all subsequent ports not being recognised by your host. -
Page 9: Using Your Ts3-16
5.Using your TS3-16 5.1.Using without connecting to a host computer When the Hub is switched on (and not connected to a local host computer) it is automatically configured to charge devices using its intelligent charging algorithm. Simply connect the devices to any of the available ports using USB2.0 or USB3.2 compliant cables. - Page 10 Syncing. You can use the program of your choice to transfer data to and from your device. If the attached device has a BC1.2 compliant CDP port, the device can draw up to 1.5A while transferring data. TS3-16 Page 9 of 21...
-
Page 11: Scalability
Thunderbolt™ ports of the next device in the daisy-chain. Using this approach, a maximum of six hubs can be linked together, allowing a total of 96 devices to be synced from a single host computer. TS3-16 Page 10 of 21... -
Page 12: Manage Ports & Your Ts3-16
5.4. Manage Ports & Your TS3-16 Each port on your TS3-16 can be managed either individually or all together. You can turn the ports off and on, change the port mode or change the charging profiles. This can be done either through LiveViewer or by connecting to the hub via the API. - Page 13 Once selected press the update button at the top and the update will commence. Your Cambrionix Firmware may get corrupted Do not interrupt the Firmware update process TS3-16...
-
Page 14: Software
Further information on LiveViewer is available on our website. 5.5.2 Cambrionix API Cambrionix API allows you to monitor and control each port in more detail and to integrate these functions into your own workflow processes. The API comprises a daemon that can be downloaded from www.cambrionix.com/products/api... -
Page 15: Updating Software
By using LiveViewer you will be able to automatically download and install the most up to date software (LiveViewer and the Cambrionix API) By going into the settings section on the left hand side of LiveViewer you can navigate to the general tab and under this can see the options for keeping both LiveViewer and the API up to... -
Page 16: Command Line Instructions (Cli)
Report state for all ports every [s] seconds and loge [s] events as they occur Live view (periodically updated screen showing system state) Enter or exit mode where console is remote [exit|kexit] controlled by terminal TS3-16 Page 15 of 21... - Page 17 <|> is a list of profile IDs Blank to use all profiles <i> is a single profile ID Optional parameters are shown in [ ] Com- Parameters pulsory in < > Tab key Re-runs previous command Cursor up recalls last command TS3-16 Page 16 of 21...
-
Page 18: Cleaning Your Ts3-16
If there is a dirt/ spillage over a ventilation slot, external data/ power connector or product aperture, please remove power from the unit without touching the liquid and contact Cambrionix immediately Ensure that the product is switched off and the power cord is removed from the product. -
Page 19: Product Specifications
2 x Thunderbolt™ 3 Output Connectors 16 x USB 3.2 Type-A Maximum Data Speed 40Gbps Ambient Operating Temperature range 10-35 °C Relative humidity 5% to 95% non-condensing Dimensions 482 x 270 x 42mm Weight 3.7kg TS3-16 Page 18 of 21... - Page 20 TS3-16 Page 19 of 21...
-
Page 21: Compliance And Standards
CE Tested and marked China CCC Certification FCC Part 15 Tested and marked Housed within a UL94-VO specification fire enclosure Japanese PSE certification (pending) RoHS Compliant Independently safety tested by the Underwriters Laboratory (UL) under file #E346549 TS3-16 Page 20 of 21... - Page 22 This manual may make reference to trademarks, registered trademarks, and other protected names and /or symbols of third-party companies not related in any way to Cambrionix. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by Cambrionix, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
- Page 23 Cambrionix Ltd The Maurice Wilkes Building Cowley Road Cambridge CB4 0DS United Kingdom +44 (0) 1223 755 520 enquiries@cambrionix.com www.cambrionix.com 07/2021 © 2021 Cambrionix Ltd. All rights reserved.