Installation; Installation Of The Exhaust Pip; Installation Of The Window Sealing Plate - Saneo 12000 BTU Manual

by reversing the four-way valve.
- Compressor protection function: To increase the life of the compressor, it has a 3-minute delayed start
protection function after the compressor has stopped.

INSTALLATION

It is important that the installation instructions below be followed to successfully install this portable air
conditioner. If you have any difficulties or questions regarding these installation procedures, please contact
our customer service department.
IMPORTANT : Before using the unit, keep it upright for at least two hours.
The air conditioner can be easily moved around a room. When moving, make sure that the air conditioner is in
a vertical position and that it must be placed on a flat surface. Do not install and use the air conditioner in the
bathroom or in other humid environments.

Installation of the exhaust pip

1. Insert the exhaust pipe into the air vent on the back of the unit as shown in the image above.

Installation of the window sealing plate

1. Open the window halfway and mount the sample plate on the window as shown in the images below.
Components can be placed horizontally and vertically.