Control Panel; Protection Function - Saneo 12000 BTU Manual

Window sealing plate
1.Ionizer function: not active on this product.
2. Swing: air flow orientation
3 Timer: When the unit is on, press the TIMER button to stop this function and when the unit is off, press the TIMER button to
start the timer function. When the timer icon flashes, press the 5 and 7 keys (see illustration above) to select the desired time.
4. SPEED - In cooling, ventilation and ventilation mode, press to select high, medium or low speed. This function is not
available in standby mode (SLEEP) and dehumidification mode.
5 and 6 . Up/Down Keys - Press these 2 keys to select the temperature (this function is not available when the unit is in fan or
dehumidifier mode) or timer.
7. Function button (MODE) - press this button to select the cooling, fan or dehumidifier functions.
8. Standby mode (SLEEP) - When the unit is in cooling (or heating) mode, press this button to activate this function. In standby
mode, the wind speed is set to low speed and is not adjustable. The SLEEP mode can be cancelled by pressing the key.
9. Power - on/off button.
10.Wifi- not active on this product

Protection function

- Frost protection function: In cooling mode, if the exhaust pipe temperature is too low, the unit
automatically switches to protection mode.
- Water overflow function: When the water in the water tank exceeds the warning level, the machine
automatically triggers an alarm and the "FULL" indicator light flashes. At this point, you must move the
drainage pipe connecting the machine or water outlet to the sewer or other drainage area to drain the
water (see drainage instructions at the end of this chapter). Once the water has been drained, the
machine automatically returns to its original state.
- Automatic defrosting: The machine has an automatic defrosting function, defrosting can be carried out

Control Panel