Unpacking The Instrument - Molecular Devices SpectraMax iD3 Installation Manual

SpectraMax iD3 Multi-Mode Microplate Reader Installation Guide

Unpacking the Instrument

The packaging is designed to protect the instrument during transportation.
Transport locks are placed on the transport slide and the plate drawer to protect the
instrument from damage during shipment. You must remove the transport locks before you
power on the instrument.
To unpack the instrument:
1. Check the box for damage that occurred during transportation. Inform the supplier
immediately and keep the damaged packaging.
2. With the box facing up as indicated, cut open the side of the box labeled Open Here.
7
WARNING! LIFTING HAZARD.
people to lift the instrument.
Note: Retain the shipping box and all packaging materials for future transport needs.
Do not use tools that can damage the packaging or the instrument.
CAUTION! When transporting the instrument, warranty claims are void if improper
packing results in damage to the instrument.
CAUTION! Keep the box upright. Do not tip or tilt the box or place it on its side.
To prevent injury, use a minimum of two
5054744 C