Table of Contents
Advertisement
Related Manuals
Manuals
Part
Description
™
308302
DynaMite
3A3442
NXT Air Motor Repair and Parts Manual
Part Numbers
Maximum Fluid
Part No.
Working Pressure
25D100
1200 psi (8.3 MPa, 83 bar)
25R495
1200 psi (8.3 MPa, 83 bar)
Overview
The Tandem Heavy Duty DynaMite Supply System is
designed to provide continuous dispensing of material
by having two DynaMite 190 Extruders supplying mate
rial to the same dispensing equipment. This method
avoids having to interrupt production when replacing a
pail of material.
Only one supply pump is active at a time. The system
automatically starts the non-active supply pump when
the active supply pump is done dispensing material.
This enables the operator to replace the pail of material
for the pump that just completed dispensing while the
other pump continues to dispense material.
This process is controlled by a switch on each supply
pump that is triggered when the pump reaches its low
limit. When the system stops that pump from dispensing
and actuates the other pump, the light tower signals the
operator that it is time to replace the pail of material.
3A5311D
190 Extruder Instructions - Parts
Tandem Heavy Duty DynaMite Supply System with hoses, 5/8 x
120-outlet -
Approved
Tandem Heavy Duty DynaMite Supply System with hoses, 3/4 x
120-outlet -
Approved
Description
Related Manuals
3
Advertisement
Table of Contents
