Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7772-K455
Summary of Contents for NCR 7772-K455
- Page 1 Kit Instructions XL10 Mounting Bracket with Cable 7772-K455 Issue A...
-
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. -
Page 3: Kit Contents
XL10 Mounting Bracket with Cable This kit provides a mounting bracket and cable to install the XL10 Customer Display on the neck of the NCR CX7 All-in-One POS (7772). Kit Contents... -
Page 4: Installation Procedure
XL10 Mounting Bracket with Cable Installation Procedure 1. Remove the two (2) screws that secure the Front Neck Cover to the Neck. • flat head screws for Base without Integrated Power Supply • thumbscrews for Base with Integrated Power Supply 2. - Page 5 XL10 Mounting Bracket with Cable 4. Remove the Base Rear Foot (2 screws). 5. Pivot the Back Neck Cover away from the Neck. The Cover has a simple snap fit connection at the top.
- Page 6 XL10 Mounting Bracket with Cable 6. Remove the Cable Cover. a. Remove the two (2) screws that secure the Cable Cover to the Back Cover. b. Rotate and unhook the Cable Cover from the Back Cover. 7. Route the USB-C Cable through the Neck opening, then connect the USB-C Cable on the CX7 Display and tighten the thumbscrew.
- Page 7 XL10 Mounting Bracket with Cable 8. Connect the other end of the Cable to the back of the XL10 Display and route the Cable around the cable strain relief posts as shown. 9. Route the Cable through the Bracket as shown and install the Bracket on the back of the XL10 Display (4 screws).
- Page 8 XL10 Mounting Bracket with Cable 10. Install the XL10 Display and Bracket assembly on the Neck. a. Insert the Bracket Hooks on the Neck. Note: For clarity, the XL10 Display is not shown in the illustration. b. Secure the Bracket to the Neck with two (2) screws. Note: Ensure no cables are pinched.
- Page 9 XL10 Mounting Bracket with Cable 11. Mount the XL10 Mount Back Neck Cover on the Neck. The Cover has a simple snap fit connection at the top. 12. Reinstall the Base Rear Foot. 13. Reinstall the Cable Cover. 14. Reinstall the Front Neck Cover.
Need help?
Do you have a question about the 7772-K455 and is the answer not in the manual?
Questions and answers