Connecting The Line Outputs - Renkforce AN-8015B Operating Instructions Manual

Connecting the LINE Outputs

The car radio has four LINE outputs for connecting power amplifiers.
For the connection of the cinch sockets only use the shielded cinch wires. Use of any other
cables may cause interferences.
Keep the distance of the cables as short as possible.
Do not place the cables near other cables to avoid interferences in the cables.
To avoid distortions or mismatching that could damage the device or power amplifier, cinch
connector must only be connected to devices with the suitable cinch terminals. For this,
observe also the connection information in the section "Technical Data".
• Connect the sockets OUT FL and FR to the inputs of the power amplifier for the front speakers.
• Connect the sockets OUT RL and RR to the inputs of the power amplifier for the rear speakers.

The red socket is a terminal for the right channel.
The white socket is a terminal for the left channel.
60
Operating Instructions

English