B) Connecting The Line Outputs; C) Aux Connection; D) Hands-Free Microphone Connection; E) Connection Of The Speakers And The Power Supply - Renkforce RUCD-1804BT Operating Instructions Manual

b) Connecting the LINE Outputs

The car radio has LINE outputs for connecting a power amplifier.
For the connection of the cinch sockets only use the shielded cinch wires. Use of any other cables may
cause interferences.
Keep the distance of the cables as short as possible.
Do not place the cables near other cables. to avoid interferences in the cables.
To avoid distortions or mismatching that could damage the device, cinch connector must only be connected
to devices with the suitable cinch terminals.
Connect the cinch sockets at the rear of the casing to the power amplifier inputs.
The red socket is a terminal for the right channel
The white socket is a terminal for the left channel

c) AUX Connection

You can connect an external audio device (e.g. portable MP3 player) to the port AUX (19) whose signal is played
back via the speakers.
• Connect the port AUX (19) with the audio output of the external device.

d) Hands-Free Microphone Connection

• Connect the plug of the hands-free microphone to the coupling of the black connection line at the back of the device.

e) Connection of the Speakers and the Power Supply

Vehicles equipped with an ISO plug can be connected directly to the ISO connection terminal if the plug assignment
is the same (please check beforehand!). If the plug assignment differs, use a vehicle-specific adapter from a vendor
for connection.
Please refer to the following figures for the contact assignment of the ISO connection socket of the car radio. Please
ask your car dealer for the respective assignment of your vehicle system plug.
40