Renkforce AN-8015B Operating Instructions Manual page 76

Establishing a phone call
• Push the button
• Dial the desired number with the number keys.
• The dialled number appears in the display (5).
• Push the button

Push the button
a new one if required.
Accepting an incoming phone call
• If calls are not accepted automatically, push the button
Rejecting an incoming phone call
• Press the button BND /
Ending a phone call
• Push the button BND /
Redial
• Keep the button
• The display shows DIALING and the last number dialled is dialled again.
Call handover
• During a phone call, push the button
hands-free system.
Caller ID display
• For an incoming phone call, the caller ID is shown in the display (5).

If the caller suppresses his caller ID or the mobile phone network does not support this feature, the caller
ID cannot be displayed.
76
/ TEL-MENU (4) to enter the phone mode.
/ MOD (6) to dial.
/ TEL-MENU (4) while entering the number to delete the displayed number and dial
(11) to reject the phone call.
(11) to end the phone call.
/ MOD (6) pushed to call the last number dialled again.
/ MOD (6) for 2 seconds to hand over the call to the mobile phone or the

/ MOD (6) to accept the phone call.
Operating Instructions
English