McQuay RVSS14 Installation, Operation And Maintenance Manual page 47

Fault
Description
Code
F96 CPU Error
CPU Error –
F97 SW Watchdog
Fault
F98 CPU Error
CPU Error –
Program
F99
EPROM
Checksum Fault
IOMM Starter
Detailed Description of Fault / Possible Solutions
If fault persists after performing a Factory Parameter reset, consult factory.
The D3 control has detected an internal CPU problem. Consult factory.
The D3 control has detected an internal software problem. Consult factory.
The D3 control has detected an internal CPU problem. Consult factory.
The non-volatile program memory has been corrupted.
Consult factory. Control software will need to be reloaded in to the D3 control card
before normal operation can resume.
47