Sd Card Slot; Buttons; Connectors - Axis Q8752-E User Manual

AXIS Q8752-E Bispectral PTZ Network Camera
Specifications
Amber/Red
Red

SD card slot

CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in operation. Disconnect from power
supply before installing or performing maintenance on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect from power supply and allow the
surfaces to cool before performing maintenance on the product.
NO NOTICE NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 19.

Connectors

Network connector
RJ45 Ethernet connector.
SFP connector.
Audio connector
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
• Audio in – 3.5 mm input for a digital microphone, an analog mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
25