Test Report Downloading Procedure - ABB SACE PR010/T Instructions Manual

The PC will instead display the message:
'TOO MANY ERRORS, PROGRAM ABORTED'.
11. Press ESC on the SACE PR010/T unit to return to the screen:
'Program failed'
'ENTER for recovery'
12. In the PC's UNIT menu, select START UPDATE PROGRAM.
13. Proceed as described in point 7 onwards.

5.2.2. Test report downloading procedure

At the end of each test sequence the PR010/T allows to store the data for a test
report. The procedure for downloading a test report is the following:
1. Switch on the SACE PR010T test unit.
2. Using the cable supplied, connect the unit to one of the PC's serial ports
(COM1...COM4).
3. Insert the software update diskette in the corresponding PC drive and run the
010_PCI.EXE program.
4. In the FILE menu, select NEW REPORT FILE NAME, name the file and path
extension and press OK. The software DOWNLOAD window will now open.
5. From the main menu of the SACE PR010/T unit, select
'2.Report download'
The following message will now be displayed:
'REPORT'
'1. Download'
'2. Erase'
Select:
'1. Download'
The following message will now be displayed:
'Report download'
Press 'ENTER to return'
Press ENTER on the SACE PR010/T unit to display the following message:
'Waiting for report download'
Before one minute elapses, press OK in the window displayed on the PC.
The SACE PR010/T unit will now display the message: 'Download in
progress' accompanied by a progressive status bar indicating the download
time remaining. This process takes about one minute.
6. If the file is successfully downloaded, the SACE PR010/T unit will display
the message:
'END report download'
Press 'ESC to return'
The PC will automatically open a window (e.g.: in NOTEPAD) displaying the
downloaded test report.
ABB SACE
SACE PR010/T
RH0025.002
L0876 14/22