Test Report Erasing; Protection Unit Reference - ABB SACE PR010/T Instructions Manual

Test unit

Hide thumbs Also See for SACE PR010/T:

Table of Contents

Press ESC on the SACE PR010/T unit to return to the main menu.

If the file is not successfully downloaded, the SACE PR010/T unit will display

the following message:

'Download aborted'

Press 'ESC to return'

The PC will instead display the message:

'UPLOAD FAILED: TIMEOUT WAS RECEIVED'.

Press ESC and resume as described in point 4 onwards.

In the event of problems not described in this section, refer to the "Error messages

and troubleshooting table".

5.2.3. Test report erasing

The following procedure erases entirely the test reports stored in the PR010/T:

Switch on the SACE PR010/T test unit.

From the main menu of the unit, select:

'2. Report Download'

'2. Erase'

The following message will now be displayed:

'Report erasing'

'ENTER to proceed'

'ESC to return'

Select ENTER to erase the reports.

See annex n.RH0029.002

ABB SACE

SACE PR010/T

RH0025.002

L0876

15/22

Table of Contents