Technical Specifications; User Interface; Power Supply - ABB SACE PR010/T Instructions Manual

6. Technical specifications

6.1. User interface

The user interface comprises an alphanumeric display, membrane keyboard and
indicator led.
Each time a key is pressed, an acoustic signal is emitted. The back-lit LCD display
features 4 lines each containing up to 20 characters.
The display's back-lighting automatically switches off when the keyboard is idle,
unless connected to the external power supply.
If no key is pressed for at least 5 minutes the display switches off automatically
to minimise electrical consumption.

6.2. Power supply

The SACE PR010/T test unit is a portable instrument operated by 6 rechargeable
batteries and/or an external power supply.
When installing the rechargeable batteries in the PR010/T unit, pay attention to
the polarity indications in the space provided for the batteries.
The specifications of the external power supply supplied are as follows:
- Vin
- Vout
- Max output current
The specifications of the rechargeable batteries supplied are as follows:
- Size
- Type
- Voltage
- Capacity
The operating autonomy of the batteries during testing depends on the type of
release tested, the type of tests performed, the different release versions and the
operations performed by the user. When testing, for example, a PR112/P unit the
batteries operate for about 2 hours under test conditions and 6 hours in stand-by
mode.
The battery recharge time is about four hours with unit switched off.
The batteries recharge automatically when the SACE PR010/T test unit is connected
to the external power supply.
The rechargeable batteries are supplied discharged. The batteries must therefore
be recharged before using the PR010/T test unit for the first time.
The test unit may also be connected to the external power supply.
ABB SACE
= 100...240 Vac (47...63 Hz)
= 12 Vdc ±5%
= 2.7A
= AA
= NiMH
= 1.2V
= 1300mA/h
SACE PR010/T
RH0025.002
L0876 16/22