Table of Contents
Advertisement
ELIS PLZEŇ a. s.
5.1.2. Error and diagnostic messages
As long as you move in the control or parameter-setting menus, the display remains in the
active mode (backlighted).
The backlighting time can be set in the menu item Backlighting time. Deactivated display will
automatically be activated upon touching any control button.
5.1.3. User password
To enter Main menu from Basic screen, actuate the ESC 2 s button and specify your user password.
The initial user password is pre-set in production at 0000.
The user password can only be changed using the FLOSET 4.0 program via communication line
RS-485 MODBUS RTU.
Should no control button (▲, ►, ESC, ENTER) be actuated during the recent three minutes, or should the
specified backlighting time elapse before that, the display will return automatically to the Basic screen
format.
ELIS PLZEŇ a. s., Lucni 425/15, 301 00 Plzeň, Czech Republic tel.:+420 377 517 711, fax:+420 377 517 722
Project design, installation and service manual
Electromagnetic flowmeters of the type series
FLONEX FXx11x and FLONET FH30xx
Meter control instructions
Error
code
E00
No error
E01
ADC overflow condition
E02
Fast flow-rate changes
E03
Memory write or read error
E04
Another electronic unit error
E05
Warning: zero flow rate calibration impossible
E06
Low excitation current
E07
Short-circuited coils
E08
Information: calibration in progress
E09
Empty piping
E10
OUT1 error
E11
OUT2 error
E12
Information: IOUT outside permitted range
E13
Incorrect time setting
E14
Q4 exceeded
Description
Page 7 o
33
f
Es 90 686 K
Advertisement
Table of Contents
