Elis FLONEX FXx11x Series Control Instructions page 31

ELIS PLZEŇ a. s.
reading Failed connection will be shown on that line. At the same time, button
in the top right-hand corner of the screen.
Bookmark Data
1
The Data file includes a list of items where selection of any of these will open a table including a detailed
description of the item and the current setting of the relevant parameters. If required, the set parameter
values can be modified here.
1 The bookmark column includes the following items:

Initial setting

Manufacturing data

Log

Current data

Current output

Multifunction outputs

HART

MODBUS

Errors

Service

Data archiving
The FLOSET 4.0 program has been designed to support different types of flowmeter manufactured
by the company ELIS a. s. Plzeň. It may happen that some function names referred to in the
program are not identical with messages appearing in abbreviated form on the meter display.
Nevertheless, the functions are always easy to identify and understand.
Apart from functions accessible to the user in the manual meter control mode, program FLOSET
4.0 working via the RS-485 MODBUS RTU communication interface makes also possible:

Setting the user passwords;

Reading of the historical flow-rate data (the hourly, daily and monthly flow-rate values)
ELIS PLZEŇ a. s., Lucni 425/15, 301 00 Plzeň, Czech Republic tel.:+420 377 517 711, fax:+420 377 517 722
Project design, installation and service manual
Electromagnetic flowmeters of the type series
FLONEX FXx11x and FLONET FH30xx
Meter control instructions
2 8 6
10 3
11
4 9
Page 31 o 33
f
will flash in red
7
5
Es 90 686 K