Timeguard TRT05 Installation & Operating Instructions Manual page 8

• Use the 'TEMP' or 'MODE' button to set
• Press the 'PROG' button to save and move
• Use the 'TEMP' or 'MODE' button to set
• Press the 'PROG' button to save and move
7
7.1. Programming across
• Using program 1, enter your ON time.
• Leave the OFF time set to 4 dashes '--:--'.
• Using program 2, enter an ON time of 0:00
• Enter your OFF time. Using the above
the hours.
to the minutes.
the minutes.
to the 'Prog 2 ON' time. Follow the same
procedure if more ON/OFF times are required,
there are 3 ON/OFF programmes available.
Note: If no more ON/OFF times are required,
leave the remaining programs set to 4 dashes
'--:--', and hold down the 'PROG' button for
approximately 3 seconds. This will save and
exit the programming time mode (this can
be done at any time during programming).
midnight
For example: an ON time of 22:00PM,
and an OFF time of 02:00AM;
Using the above example this will be 22:00.
(i.e. midnight).
example this will be 02:00.