Timeguard TRT05 Installation & Operating Instructions Manual page 5

• Use the 'TEMP' button to increase the
4
• Set the hour and press the 'TIME' button
• Use the 'TEMP' or 'MODE' button to set
• Press the 'TIME' button to save and exit t
• The display will now show the correct time,
numeric value, or 'MODE' button to decrease
the numeric value. The clock is set in
24 hour format.
Note: When the 'TEMP' or 'MODE' buttons
are held down, the adjusted setting will scroll
more rapidly. Holding down the 'TIME' button
for approximately 3 seconds will exit the
programming time mode (this can be done
at any time during programming).
to move to the minutes.
the minutes.
he Time/Date entry and return to the
operating mode.
and the output status will show OFF.
See the below example;