Programming The Time - Timeguard TRT05 Installation & Operating Instructions Manual

• If the screen is completely blank the device
• The factory fitted non replaceable battery will
• The internal battery will continue to be
• Battery life (approx.) 1000 hours.

5. Programming the Time

• From the first power up and reset, the display
3
• Press and hold the 'TIME' button for
• Release the button when 'SET' is displayed.
will need to be fully re-charged. Plug in for
4 hours and press the reset button, located on
the back of the device, to bring the screen on.
keep the programmed times during power
down situations for up to 4 weeks.
charged as long as there is a supply
to the unit.
will show the following 4 dashes, indicating
the device is ready to be programmed;
approximately 3 seconds. Whilst holding
the word 'HOLD' will be displayed;
The hour cursor will blink;