Advertisement
Once you have confirmed the modules working status, retrieve the pockeV
shifter panel removed during step 2 of the disassembly process. Follow
steps 6 and 7 below ensure the pocket modification is done correctly.
6. Place the HAQ03 into the lower
pocket, use a contrasting chalk/
marker to mark where the hole will
be drilled.
Note: The bezel has a designated
slot for power cable to pass
through.
7. Remove the bezel and carefully
make a hole large enough to pass
the provided Type-C connector
through
CAUT10NI
a hole while the pocket is still mounted
to the vehicle.
TECH
SUPPORT ■ ( 800 ) 363-4490 x1 I www.scosche.com/contact
PREPARATION
attempt to drill
DO NOT
2012 Honda Civic
Shifter Pocket Panel (Bottom View)
Sample location of hole area
I
If you have any questions or need technical assistance with the installation,
or the most current application please call or visit us on the web at:
6
Advertisement
