Table of Contents
Advertisement
10.3.1.11 DISPLAY
Functions
Set:
-
DISPLAY?
Get
Description
Set:
-
Get:
Get output HPD status
Response
SPout_id,statusCR LF
~nn@DISPLAY
Parameters
out_id – Out=1
status – HPD status according to signal validation : 0 (Off), 1 (On), 2 (On and all parameters are stable
and valid)
Response Triggers
A response is sent to the com port from which the Get was received, after command execution and:
After every change in output HPD status from On to Off (0)
After every change in output HPD status from Off to On (1)
After every change in output HPD status form Off to On and all parameters (new EDID, etc.) are stable and
valid (2)
K-Config Example
Get the output HPD status of HDMI Out:
"#DISPLAY? 1",0x0D
50
Permission
-
End User
Syntax
-
#DISPLAY?SPout_idCR
Transparency
-
Public
692 - Protocol 3000
Advertisement
Table of Contents
