Promac JDT-5030 Operation Manual page 6

1.10 A safety protection guard under the spindle box is available as it is not only prevent
coolant splash while cutting but also could observe the machining status.
The guard is interlocked with the spindle, so when the guard is opened, the spindle
could not be running until the protection guard keeps his position.
2. Main technical data:
2.1 Main technical data
No.
Max. dr i lling di a meter ( s teel)
1
2 Max. t a pping diameter ( s teel)
3
Distance between spindle center line to the center line of column
Max. distance between spindle end to the surface of the worktable
4
(automatic)
5
Max. distance between spindle end to the worktable surface of the base
6 Max. stroke of the spindle
Spindle taper
7
Number of speed steps of the spindle
8
Spindle speed range
9
Feed steps of the spindle
10
Feed range of the spindle
11
Max. stroke of worktable and its bracket
12
Rotation degree of worktable and its bracket in cross direction
13
Working area of the worktable (L x W)
14
Working area of the worktable of the base (L x W)
15
Numbers and width of the T slots both for worktable and
16
worktable of base
17 Diameter of column
18 Power and speed of the main motor
19 Power and speed of the worktable up and down motor.
20 Power and flow rate of the coolant pump motor
21 Machine dimension (L x W x H)
22 Weight of the machine (Net weight/Gross weight)
Operation Manual
Name of the items
Total
page
Unit Data
mm
mm M30
mm 370
mm 585(410)
mm 1170
mm 240
Morse MT4
Step
r/min 40-2100
Step
mm/r 0.1-0.4
mm 530(410)
±45°
degree
mm 600×500
mm 445×435
mm 2-T14, 2-T14
φ200
mm
kW, rpm 2.2/2.8; 960/1440
kW, rpm 0.25/1440
kW, L/min 0.18/6
mm 1020×700×2350
kg 660/720
26
3
50
12
4