Silvercrest SBTF 10 E5 Quick Start Manual page 13

■
Defective components must always be replaced with
original replacement parts . Compliance with the safety
requirements can only be guaranteed by using these
replacement parts .
■
Never operate the device in the vicinity of naked flames
(e .g . candles), and do not place burning candles on or
next to the device . This will help to prevent fires .
■
Do not expose the device to water spray or dripping wa-
ter, and do not place liquid-filled objects such as vases or
open drinks containers on or near the device .
■
Never subject the device to extreme heat or humidity .
This particularly applies to storage in a car . If the car is
at a standstill for longer periods and the weather is warm
with solar irradiation, high temperatures occur in the car
interior and the glove compartment . Remove electrical
and electronic devices from the vehicle .
■
Always unplug the charging cable by pulling on the plug
– do not pull the cable itself .
■
Do not place any items of furniture or other heavy
objects on the charger cable and ensure that it cannot
become kinked .
■
The charger cable must be routed so it does not interfere
with the operation of the vehicle . The charger cable
may not be routed through the deployment area of the
airbag, as this could cause serious injuries if the airbag
is triggered .
■
DANGER! The device has an integrated lithium-
polymer battery . Improper use of lithium polymer batter-
ies can cause fires, explosions, leakages of hazardous
materials or other hazards! Do not throw the device into
an open fire .
■
ATTENTION! Comply with all local laws . Your hands
must always be free to operate the vehicle safely when
you are driving . Traffic safety must always take priority
whilst driving .
■ 6 │ GB │ IE │ NI
SBTF 10 E5