Charging The Hands-Free Set - Silvercrest SBTF 10 E5 Quick Start Manual

Charging the hands-free set

CAUTION!
► Charge the hands-free set only in dry interior spaces .
► Use only the supplied charger cable
adapter
► Always disconnect the charger cable
adapter
Before using the device, the integrated battery must be
completely charged .
♦ Connect the micro USB plug on the charger cable
the micro USB charging port
♦ Connect the USB plug on the charger cable
USB charging socket
♦ Plug the car charger adapter
in your vehicle . The operating LED
The
Once charging is completed (around 2 hours), the light
on the
♦ Unplug the car charger adapter
socket . Disconnect the charging cable
charger adapter
NOTICE
► If you hear a beep and the
orange, the charge level of the battery is low and the
battery needs charging .
CAUTION!
► To preserve your car battery, charge the battery only
when the motor is running .
► Do not charge the battery while the hands-free set is
attached to the sun visor as the connecting cable may
interfere with the operation of the vehicle .
► Alternatively, you can also charge the battery on an
external USB mains adapter . Use only USB mains
adapters with an output voltage of 5 V and an output
current of at least 500 mA to charge the battery . Use
the supplied charging cable for this
■ 10 │ GB │ IE │ NI
to charge the hands-free set!
when charging is complete!
button lights up orange during charging .
button goes out .
and the hands-free set .
/the car charger
/the car charger
on the hands-free set .
on the car charger adapter
into a suitable socket
lights up green .
from the vehicle
button
.
to
to the
.
from the car
starts flashing
SBTF 10 E5