Operation - ATD Tools ATD-7345B Owner's Manual

Unpacking
for more details. If part is
Assembly
h
!
WARNING: Do not lift or carry jack by handle. Handle could dislodge and jack could fall, resulting in
possible injury or property damage.
1. Test the
handle up and down. The
if still s down, the power unit ma need to have the air pur
!
WARNING: The jack, and equipment being lifted, must be stable so when lifted, they do not fall and cause
points for the vehicle.
T
4. T
5. the handle up and down until the saddle
7. the vehicle stands, or other support devices under the
around it.
CAUTION: AVOID RAPID DESCENT AND TO AVOID SPILLING OF THE LOAD, TURN THE HANDLE SLOWLY.
PREPARATION
to sure that all of the parts are included.
or
the saddle under a
saddle should rise and sta at that level. If it slowl
The saddle should lower completel .
do not attempt to

OPERATION

dead load. Turn the handle
from its
touches the item
4
to the parts lists and
install or operate the product. Contact
s down, t ten the oil
em. fer to the Maintenance Section.
lifted. the saddle position so
to do
and pump the
. If
in or