Page 1
MX-880 MIXER/ DISTRIBUTION AMPLIFIER INPUT LEVEL dB OUTPUT LEVEL dB INPUT OUTPUT LEVEL dB INPUT OUTPUT LEVEL dB INPUT OUTPUT LEVEL dB INPUT OUTPUT LEVEL dB INPUT OUTPUT LEVEL dB INPUT OUTPUT LEVEL dB POWER MX-880 SPLITTER SPLITTER SPLITTER SPLITTER...
Page 2
MX-880 SAFETY INSTRUCTIONS www.unika.com.tw CAUTION This symbol, wherever it appears, alerts you RISK OF ELECTRIC SHOCK to the presence of uninsulated dangerous DO NOT OPEN voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.
Page 3
| Front Panel | Rear Panel | Operation | Application Samples | Specifiction INTRODUCTION The MX-880 of UNiKA line mixer / distribution amplifier allows to connect 6 channels of XLR and 2 channels of 1/4” TRS inputs and mixed down into L/R stereo outputs; and...
MAIN INPUT LEVEL MAIN OUTPUT LEVEL The MX-880 has six identical channels, each one is equipped with 2 rotary controls, 1 button and 8 LED indicators, also the same on the main control section (in/out), please see details as below: 1.
MX-880 www.unika.com.tw Rear Panel | Operation Introduction | Features | Warnings | Front Panel | | Application Samples | Specifiction REAR PANEL AC INPUT Serial No.: CH 4 OUT CH 4 IN MAIN OUT R MAIN OUT L MAIN IN R...
In this mode, the output signal from the mixer is applied to the main inputs of the MX-880. If the SPLIT/MIX switches are set to “SPLIT”, the mono outputs of the respective channels provide either the left or the right main signal.