Saeco IDEA RST Technical Manual page 40

English
8.2.7.2 TESTING PROCEDURE
The "Test menu" pages are as follows:
M0 PAGE:
1 Shows the Test menu page number (0-6)
2 reference of the brewing buttons pressure:
when a button is pressed, the corresponding circle light turns on.
The numbers vary according to the machine model.
3 Reference of the CPU and GUI (Graphic User Interface) Software version and of
the machine model.
The machine models are as follows:
Luxe Korea
Luxe
Cappuc.
Kor
Cappuccino
Coffee Kor
coffee
Duo
Duo Korea
Power Steam Korea
Power Steam
Cappuccino USA
Self
Eeprom CRC:
4
they are two 8-digit alphanumerical codes.
The first one is related to the GUI, the second one to the CPU.
CRC codes are used to check whether the Factory Default procedure has been successfully
completed.
(see "Factory Defaults" section)
40
M1-6 PAGE:
5 microswitches status
6 shows which buttons among A, B, C and D is pressed
7 Shows the coffee boiler temperature
8 shows the number of the grinder turns.
In menu 1, the coffee grinder motor is activated by pressing the D button
9 value corresponding to the turbine pulses (number of pulses every 2 seconds) +/- 70.
This display is turned off.