Saeco IDEA RST Technical Manual page 18

English
6.1.3.1 OK Button
Press the OK button to select the pre-ground coffee or the coffee
bean hopper according to the machine version. (except for DUO
model)
6.1.3.2 Container Selection
(for DUO model only)
The Duo version is equipped with 2 coffee bean hoppers and 2 coffee grinders.
This allows you to double the products that can be dispensed or
insert a different product quality.
Press the button to select a container.
A container selection button
B selected container indicator light
The display shows - by means of a lit icon - the active container.
In case of beverage dispensing with a
preset container, the manual selection of
the container is not valid.
18
6.1.3.3 Automatic steam wand function
(for models with automatic steam wand only)
Press the button shown in the figure for 2 seconds to activate the
steam by means of the automatic steam wand.
Steam dispensing will automatically stop when the pre-set
temperature is reached.
Steam dispensing can be stopped at any time by pressing the button
again.
The temperature for steam dispensing end can be set through the
Beverages Setup menu 19. Autosteam. As an alternative, the
dispensing end temperature can be set by immersing the steam wand
in milk or in water to be heated, and by pressing and holding pressed
the button shown in the figure until the desired temperature is
reached. The temperature reached when the button is released will
be stored for the following steam dispensing cycles.
When the Auto Steam function is active, the display shows the icon
as shown in the figure.
The same icon flashes while programming temperature.