Saeco IDEA RST Technical Manual page 35

9.3 SERVICE
dd.mm.yyyy
Esc
Today
9.3.2 Reset
9.4 Descaling
dd.mm.yyyy
Esc
Today
9.4.2 Reset
9.5 Buzzer
On
Menu only
Off
9.6 Brewing unit
Type A
Type B
9.7 Model selection
Luxe Korea
Luxe
Cappuc.Kor
Cappuccino
Coffee Kor
coffee
Duo
Duo Korea
Power Steam Korea
Power Steam
Cappuccino USA
Self
10 STEAMING OUT
10.1 Start
10.2 Stop
11 CHANGE PASSWORD
11.1 Technical password
11.2 User password
12 AUTOM.SWITCH MENU
Deact.
Act.
13 PROGR. QUANTITY
Deact.
Act.
14 Factory defaults
Deact.
Act.
15 BEVERAGE ENABLED
15.1 Espresso
On
Off
15.2 Espresso x2
On
Off
15.3 coffee
By updating the Service and Descaling dates, the corresponding counters in the "SERVICE" and "DESCALING" options will not be reset.
By updating the Service and Descaling dates, the corresponding counters in the "SERVICE" and "DESCALING" options will not be reset.
The "BUZZER" option activates or deactivates the buzzer or allows to select it only for the MENUS.
The "BREWING UNIT" function allows to choose how to carry out the double coffee cycles.
- the machine carries out the cycles for long and strong double coffee in a single brewing cycle.
- the machine carries out the cycles for long and strong double coffee in two sequential brewing cycles.
The "MODEL SELECTION" function selects the machine model whether interventions or updating on the electronic boards are required
After selecting the model of the machine, a factory default must be carried out (see "Factory Default" section).
Not selectable
Not selectable
This function allows you to empty the water circuit and the coffee boiler to prevent the appliance - if exposed to very severe
temperatures (e.g. transport in cold Countries) - from getting damaged due to the ice forming in the circuit.
By selecting START, the automatic procedure is activated. If necessary, it can be interrupted by selecting STOP.
Modifies the user password and the technician password. The latter gives access to the "Technical" and the "Test menu" menus.
Press the UP or DOWN buttons to select a code number.
Press OK to confirm and move on to the following box.
Press ESC to confirm and exit.
default:
1234
default:
0000
- Deact.:
you cannot change times and activate or deactivate the "Automatic start-up" function.
Prevent the customer from turning on the machine during the programmed switching-off time.
- Act. :
you can set and change the turn on and off times from the Customer menu.
If activated, you can set the amount of beverages by pressing it for a long time or by setting the numbers in the menu.
This function allows you to reset all the factory default parameters with a single procedure
(refer to section "Factory Defaults")
Allows to disable the beverages on the keypad and the autosteam - if required.
English
35