Honda E Manual page 644

■
Distributing the Sealant in the Tyre
Speed Restriction Label
a
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes or
three to ten kilometres (two to six miles).
u Do not exceed 80 km/h (50 mph).
3. Stop the vehicle in a safe place.
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
1Distributing the Sealant in the Tyre
Refer to the driver's doorjamb label for the specified
pressure.
Continued 643