Honda E Manual page 169

uuGauges and DisplaysuDriver Information Interface
■
Unit Change
Enables you to show another speed unit on the driver information interface and set
the displayed measurements to read in either km/h or mph.
Press and hold the left selector wheel when you select
interface. Each time you do this, the unit will change from km/h to mph or vice
versa. After this, a confirmation screen will appear for a few seconds.
■
Information
2 Driver Information Interface Warning and Information Messages P. 130
■
Remaining Battery
168
on the driver information
Displays the current status of the High Voltage
battery.
The colour of the circle represents the current
High Voltage battery status.
• Green: Charging
• Amber: High Voltage battery is running low
(approximately 15% left)
• White: When other than the above or when
fully charged
1Remaining Battery
If amber is displayed, charge the High Voltage battery
as soon as possible.