Indicator
Name
Safety Support
Indicator
(Amber)
* Not available on all models
On/Blinking
• Comes on when the Road
Departure Mitigation system, Blind
Spot Information
*
, Low Speed
Braking Control and/or CMBS
shuts itself off.
Comes on when mud, snow, or ice
●
accumulates in the vicinity of sonar.
Models with blind spot information
system
Comes on when mud, snow, or ice
●
has accumulated in the vicinity of
the blind spot information system
sensor.
Explanation
• Stays on - The area around the
camera is blocked by dirt, mud, etc.
Stop your vehicle in a safe place and
wipe the debris off with a soft cloth.
• Have your vehicle checked by a dealer
if the indicator and message are still
displayed even after you have cleaned
the area around the camera.
2 Front Sensor Camera P. 494
Remove the obstacle in the vicinity of
●
sonar sensor.
2 Low Speed Braking Control P. 441
• Comes on while driving - Something
may be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information
system sensor and remove any
obstacles.
2 Blind spot information System
P. 423
uuIndicatorsu
Message
*
Continued
127