Wi-Fi Connection - Honda E Manual

Wi-Fi Connection

You can connect the audio system to the Internet using Wi-Fi on the audio/
information screen. If your phone has wireless hotspot capabilities, the system can
be tethered to the phone. Use the following steps to setup.
■
Connecting to a Wi-Fi Hotspot
1. Select General Settings.
2. Select Connections.
3. Select Wi-Fi.
4. Select OK.
5. Select Change Mode.
6. Select Network.
u If the data sharing settings is to OFF, the
message will be displayed on the screen.
You need to change to ON.
2 System P. 328
u If you want to turn off the Wi-Fi mode,
select OFF.
7. Select the access point you want to connect
to the system.
u To add a new network or select the
saved networks, select Options.
u If Options is selected, Add Network
and Saved Networks can be registered.
uuDisplay AudiouWi-Fi Connection
1Wi-Fi Connection
Wi-Fi and Wi-Fi Direct a registered trademark of Wi-Fi
Alliance®.
1Connecting to a Wi-Fi Hotspot
You cannot go through the setting procedure while a
vehicle is moving. Park in a safe place to set the audio
system in Wi-Fi mode.
Some mobile phone carriers charge for tethering and
smartphone data use. Check your phone's data
subscription package.
Check your phone manual to find out if the phone
has Wi-Fi connectivity.
You can confirm whether Wi-Fi connection is on or
off with the icon on the system status area.
Transmission speed and others will not be displayed
on this screen.
2 Status Area P. 271
In case of Wi-Fi connection with your phone, make
sure your phone's Wi-Fi setting is in access point
(tethering) mode.
Continued 307