Honda E Manual page 422

■
Deflation Warning System Calibration
You must start deflation warning system calibration every time you:
• Adjust the pressure in one or more tyres.
• Rotate the tyres.
• Replace one or more tyres.
Before calibrating the deflation warning system:
• Set the cold tyre pressure in all four tyres.
2 Checking Tyres P. 609
Make sure:
• The vehicle is at a complete stop.
• The transmission is in ( P .
• The power mode is in ON.
uuWhen DrivinguDeflation Warning System
1Deflation Warning System
The low tyre pressure/deflation warning system
indicator may come on under the following
conditions:
•
Tyre chains are used.
1Deflation Warning System Calibration
The calibration process requires approximately
30 minutes of cumulative driving at speeds between
40-100 km/h (25 - 62 mph).
During this period, if the power system is turned on
and the vehicle is not moved within 45 seconds, you
may notice the low tyre pressure indicator comes on
briefly. This is normal and indicates that the
calibration process is not yet complete.
If the tyre chains are installed, remove them before
calibration the deflation warning system.
If the low tyre pressure/deflation warning system
indicator comes on even when the properly inflated
specified regular tyres are installed, have your vehicle
checked by a dealer.
We recommend that the tyres be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.
Continued 421