Troubleshooting - AEG DVD 4516 TFT Operation Manual

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify
the fault yourself.
Fault
The power supply
light does not light
No image displayed
on screen
No response when
pressing button
05-DVD 4516 AEG - GB Neu 65
Possible cause
No power supply
no power supply/ mains switch
switched off
During operation with a
television set:
Video cable not correctly
connected
TFT screen is switched off
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child protection system is
activated
Power supply problem or
static charging of appliance
Solution
WARNING:
Before searching for the fault, please turn the device
off.
During battery operation:
check whether the battery has clicked into place.
During mains adapter operation:
Put the mains plug in correctly, if necessary, check
the socket is working with another appliance.
Switch the player on by the mains switch (Fig. 1/1).
WARNING:
Before searching for the fault, please turn the device
off.
Check the correct fi t of the Video cable ➯ Page 50,
„Connection to Other Equipment". Make sure that the
jacks are tightly in the sockets.
Press the TFT ON/OFF (Fig. 2/1) button on the remote
control.
Insert a CD/DVD.
Use only compatible media (see ➯ Page 40, „Technical
data").
Turn the CD/DVD around.
Clean the CD/DVD around ➯ Page 52, „Handling
CD/DVD".
Use a different CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child protection ➯ Page 62, „Child
protection".
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the
player on again.
Troubleshooting
65
03.05.2006, 9:37:39 Uhr