Health And Safety - Kingspan KoolDuct System Training Manual

The Kingspan

Health and Safety

Kingspan KoolDuct panels are
Wear
glass fibre reinforced facings can be irritating to the skin.
Use suitable protective clothing (e.g. long-sleeved garments).
The reflective surface
including ultraviolet light. If this board is being installed during very
bright or sunny weather, wear UV protective sunglasses or goggles,
and if the skin is exposed for a significant period of time, protect the
bare skin with a UV block sun cream.
The facing used on this product can be
when allowed to get wet.
When hand tools with blades, saws or other cutting tools are used,
please handle the tools with caution.
Do not stand
and fabricated ducts.
Dust
When mechanical cutting is used, dust extraction shall be used (eye
protection and disposable dust mask shall be worn when appropriate).
Minimise dust and slipping hazards by disposing of the excess material
and keeping the working place tidy.
Safety Data Sheet
supplied by Kingspan Insulation
The application of adhesive and sealant shall be performed in a well
ventilated
chemically inert and safe
gloves when handling and cutting the product: particles of the
on this product will reflect light as well as heat,
on or otherwise support your weight on KoolDuct panels
is NOT normally a hazard.
are available for the adhesive and silicone sealant
area, wearing protective gloves.
System
to use.
slippery underfoot specially
5