Notice To User - Kingspan KoolDuct System Training Manual

The Kingspan

Notice to User

Kingspan Insulation Ltd provide this publication to Kingspan Insulation's Delivery
Partners and KoolDuct fabricators for information purposes as part of their Technical
Support Documentation that give broad directions and process recommendations for
the design and use of the Kingspan KoolDuct System.
This manual is not to be used as the sole reference material for the fabrication and
installation of Kingspan KoolDuct System ductwork; reference should also be made to
The Kingspan KoolDuct System Fabrication Manual (latest edition).
For specification details, reference should be made to The Kingspan KoolDuct System
Specifier's Guide (latest edition).
All principles and techniques contained in this Training Manual were developed using
reliable engineering principles and research, plus consultation with manufacturers,
users, testing laboratories, and others having specialised experience.
This manual is subject to revision as further experience and investigation may show is
necessary or desirable.
Kingspan Insulation assume no responsibility and accept no liability for the application
of the principles or techniques contained in this publication. Authorities considering
adoption of any standard contained herein should review all state, local and contract
regulation applicable to specific installations.
The Delivery Partner and/or KoolDuct fabricators shall have full regard to Kingspan's
Technical Support Documentation for the KoolDuct System and shall ensure that in any
design and any erection of using the Kingspan KoolDuct System, the guidelines in the
Technical Support Documentation are followed by it and any sub-contractors engaged
to design and/or assemble the ductwork.
Notice on the Installation of the KoolDuct System
KoolDuct Delivery Partners and KoolDuct fabricators shall only use reputable
contractors for the installation of the Kingspan KoolDuct System. Such contractors
shall be reasonably experienced in installing HVAC ductworks and must understand
the differences between the Kingspan KoolDuct System and conventional sheet metal
ductwork. The Delivery Partner and KoolDuct fabricator is responsible for ensuring
that any contractor / other personnel it uses in relation to the Kingspan KoolDuct
System have been provided with the appropriate training to enable them to install the
Kingspan KoolDuct System according to good installation practice.
In the event of any doubt please do not hesitate to contact us for further assistance.
Kingspan Insulation Limited, Torvale Industrial Estate, Pembridge, Nr. Leominster,
Herefordshire HR6 9LA, United Kingdom, Tel: +44 1544 388 601, www.kingspan.com
System
4